ATOMIUM Active Gasoline 90 - Gasoline Active, Car Engine Oil Additive

The 1st stage: Add Lubricant Composition Atomium  ACTIVE Gasoline to the working engine oil through the oil filling neck (see the graph for calculation), then run the car till the next regular oil replacement (but no less than 600 miles). In case of a significant oil contamination (identify by the colour of the oil on the dipstick or oil spots on filter paper) start the second stage of treatment immediately.

Recommendations (after the 1st Stage): Change the engine oil; Replace oil and air filter.

The 2nd stage: Add Atomium  ACTIVE Gasoline to the new engine oil (see the graph), and then run the car in a regular mode till the next oil replacement.

Important:

·         Before applying Atomium ACTIVE Gasoline + shake the can thoroughly until natural sediments (active components) are totally dissolved.

·         Apply Atomium ACTIVE Gasoline + through the regular oil filling neck of the warmed-up engine.

·         After applying Atomium ACTIVE Gasoline + the engine should work on single turns (at idle) for 5 min. and then run for no less than 20 min. in any mode (regular operation).

• It is not recommended to apply the Lubricant at existence of mechanical breakages of parts and assemblies.
• Atomium  ACTIVE Gasoline is compatible to any type of motor oils and doesn't change their properties.
• For providing continuous level of engine protection it is recommended to apply Atomium Regular at 18 000 - 25 000 miles after the complete treatment with Atomium  ACTIVE.
• After 60 000 miles to repeat the treatment with Atomium  ACTIVE Gasoline Plus is recommended.
• For turbocharged engines and forced engines the re-treatment is recommended after 30 000- 35 000 miles.
• To achieve the full level of protection the treatment of all vehicle parts is recommended, such as transmission gears, hydraulic power steering etc.

FEATURES

Tribotechnical Compound Atomium  ACTIVE Gasoline is designed for application on gasoline engines and LPG engines (including alusil and nikasil coating) of passenger vehicles and light trucks with mileage less than 30 000 miles, (including condition after overhaul).

FEATURES

Treatment stages	Oil volume in the oil pan
	From 2 to 5 ltrs	From 5 to 10 ltrs
1st stage	1 can	2 cans
2nd stage	1 can	2 cans
Treatment scheme by stages	1+1	2+2

Precautions: Not harmful if applied correctly.

First aid:

• In case of a contact with skin remove the material wash out with warm water, and then wash again with soap.
• In case of contact with eyes wash out eyes with large amount of water.
• In case of swallowing consult a doctor.