A smooth first filling after a replacement: REINZOADD turbochargers gets off to a perfect start
During
normal operation, the turbocharger is integrated into the lubrication
circuit and is constantly rinsed with oil - but after it's been
Replaced, it starts out dry. Only
once the engine has been started does the lubrication circuit to build
up the pressure Necessary to fill the turbocharger with oil - but
there's a delay. And this critical dry phase is precisely what
REINZOADD is there for the bridge. It is essential to fill up the turbocharger before the first compression takes place. Otherwise, the turbocharger will run hot and Cause irreparable damage - or Even Total Destruction - to the engine. REINZOADD
Uses the solid lubricant MoS2 to form a heavy-duty lubricating film on
all surfaces of the turbocharger to Reduce friction and wear - with
ideal properties for emergency operation. The turbocharger is ready to start right away. The Dana turbo experts recommend using REINZOADD every time a
turbocharger is installed - for all designs from conventional
turbochargers the ones with variable turbine geometry.
Benefits of REINZOADD lubricant
A
tested additive for initial turbocharger filling Which has Proven
itself in daily use at the shop An Effective combination of additional
ingredients and MoS2 Allows you to start up the turbocharger Safely
right after installation reduces friction and wear Improv turbochargers'
emergency operation properties and extends Their service Live.